Need help setting up SheetCAM

View previous topic View next topic Go down

Need help setting up SheetCAM

Post by Chris Harmon on Thu Aug 01, 2013 4:26 pm

SheetCAM looks like a great product. Especially when using the Donek drag knife. I can't wait to get it set up on my router. I have a CNT Motion Series 900 with a pallet tool changer and pusher. Because of this the standard post processor WinCNC does not seam to be what I need.

I posted on the SheetCam forum and have not had any response back. I have had D1 drag knife I bought from you at the IWF last year. I just purchased SheetCAM from Donek Tools  last week. Can you help. Thanks

Chris Harmon

Posts : 2
Join date : 2013-08-01

View user profile

Back to top Go down

Re: Need help setting up SheetCAM

Post by DonekTools on Thu Aug 08, 2013 5:37 pm

Chris,
I would suggest you contact SheetCAM's author Les Newel. I have heard that is very helpful in generating post processors. His e-mail is: les@sheetcam.com
avatar
DonekTools
Admin

Posts : 46
Join date : 2013-05-19
Location : Watkins, CO

View user profile http://donektools.com

Back to top Go down

Re: Need help setting up SheetCAM

Post by Chris Harmon on Fri Aug 23, 2013 2:00 pm

I contacted Les Newell and he fixed all my issues with the post processor. He sent me a edited version of the post processor that works great with the CNT router. Thanks for your help and for selling great products that work.

Chris Harmon
chris@azurecabinets.com
www.azurecabinets.com

Chris Harmon

Posts : 2
Join date : 2013-08-01

View user profile

Back to top Go down

Re: Need help setting up SheetCAM

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum