Discuss the Donek Tools Drag Knife
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Need Help Setting Up SheetCam - tools do not show up

2 posters

Go down

Need Help Setting Up SheetCam  - tools do not show up Empty Need Help Setting Up SheetCam - tools do not show up

Post by edubear Mon Aug 25, 2014 12:09 am

I need help with the installation of the tools on SheetCam 6.0.11
I Purchase Sheetcam thru Donek, i received the licence file for the software and the licence key for the tools.
I have installed SheetCam V 6.0.11 on windows 7.
I have already installed the license file.
The serial number of the program matches the serial number required for the installation of the tools.
I have already installed the tools license on the Option/pluginoptions menu, i clicked enabled but the Knife tools does not show up on the Tools window program.

I need assistance on this matter.

Regards


edubear

Posts : 1
Join date : 2014-08-25

Back to top Go down

Need Help Setting Up SheetCam  - tools do not show up Empty Re: Need Help Setting Up SheetCam - tools do not show up

Post by DonekTools Wed Aug 27, 2014 12:29 pm

When creating a tool path, you need to look under operations. You'll see something at the bottom that looks like a triangle. If you hover over it, you will see "create a new drag knife operation". This is how you begin creating a drag knife tool path.

You received a file called "dragknife tool set.tools" in an e-mail from Donek. Save that file to your desktop. In sheetCAM click File, then "Open Toolset". Navigate to your desktop in the file browser that opens and open the "dragknife tool set.tools" file. You should now see a list of drag tools in your tool pane.
DonekTools
DonekTools
Admin

Posts : 48
Join date : 2013-05-19
Location : Commmerce City, CO

http://donektools.com

Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum